This spacer is designed for Eagle Eye host in combination with LEDIL ANGIE-x quad TIR optics.
Hollow brass screw enables easier build and more reliable thermal contact between host and pill.
To install this set in host, an 8.5-9.0mm hole must be drilled through center of host shelf.
Compatible PCBs and optics:
MOSFET pads on these boards should be shorted if PCB is not used with LD-B4 drivers.
Please add a note during order if you want LEDs+FET jumper already soldered on PCB.
Full kits compatible with LD-B4 driver (up to 30Amps) will be available soon.
Brass screw center hole: 5.3mm